// JavaScript Document  resetGlobsL1.js
function resetGlobs()
{        //alert( "resetGlobsL1  "+1)
//    FLAGS
         feetSet= 0   // a flag => quan  has been selected. 
         colorSet = 0   // a flag =>  wire has been selected.
		 gaugeSet = 0 
		 wireFtColGauSet = 0  //replaced submitI_t (-_)
		 resetRQ = "0"
		 
//   Variables		 
		// wireL1AText = "resetA" used only in downrev stuff??
         subTotL1A = 0
		 wireColor = ""
		 wireGauge = ""
		 wireFeet = ""
		 m = 0
         wirePrice = 0
		 document.entryf1.selectColor.selectedIndex= 0;
		 document.entryf1.selectGauge.selectedIndex= 0;		 
	     document.entryf1.selectWireFt.selectedIndex= 0;   
         
		 // d.entryf1.txtL1C8.value  = "" 

		 
//		 quanSet= "0"   // a flag => quan  has been selected. 

//         itemSet = "0"   // a flag =>  item has been selected. 
//		 Item = "0"
//         subTotL1 = "0"
       //  d.entryf1.selectQuan.selectedIndex= "0"; Use for new item template, not for wire
//	         d.entryf1.selectWireFt.selectedIndex= "0";	 
	//	 d.entryf1.selectItem.selectedIndex="0"    Use for new item template, not for wire
//		 	 d.entryf1.selectColor.selectedIndex="0"
			 
	     //d.ImgL1C2.src= "images/kjcologo8463.jpg"   Use for new item template, not for wire
		 //d.entryf1.txtL1C8.value  = " "
		  
		  //new globals
/*
         quanSet= "0"   // a flag => quan  has been selected. 
         itemSet = "0"   // a flag =>  item has been selected. 
		 Item = "0"
         subTotL1 = "0"
		 //alert( "resetGlobsL1  "+2)
         d.entryf1.selectQuan.selectedIndex= 0; 
		 //alert( "resetGlobsL1  "+3)
		/d.entryf1.selectItem.selectedIndex= 0;
	     document.ImgL1C2.src= "images/kjcologo43.jpg" 
		 d.entryf1.txtL1C8.value  = " " */


  		}
		
// end resetGlobsL1.js